Uniden PC68 ELITE, User Manual, Page: 8 / 16

Dynamic Squelch Control automatically sets Squelch to the optimal level for
stronger signals. To scan for weaker signals, turn off
Dynamic Squelch
Control
and perform the following steps:
4a. Turn SQ fully clockwise so only strong
signals can get through.
4b. Turn SQ fully counter-clockwise until
you hear a hiss. Everything gets
through - noise, weak signals, and
strong signals.
4c. Turn SQ back clockwise until the hiss
stops. Only clearer signals get through.
6
To Receive
Be sure that the power source, antenna, and microphone
are properly connected before proceeding.
Set
SQ
only when the
radio is not receiving a
strong signal.
1. Turn unit ON by turning the
VOL clockwise. VOL Control
to a comfortable level.
2. Select CHANNEL .
3. Set switch to NB/ANL .
UC344FH 10/29/03 4:48 PM Page 6