
2. Follow the on-screen instructions to install your
Windows™ CE software.
♦
Hardware Setup
1. Place the docking cradle
upright on the desktop
near your computer.
Make sure there is an
adequate AC power
source nearby.
2. Plug the docking cradle’s serial cable
into the serial port of your
computer. Tighten the finger
screws on back of the
plug.
3. Plug the AC adapter into the wall.
21
!
Use only the Uniden AC Adapter
supplied with your PC100.
NOTE
“Auto Insert” in your Computer’s system
settings must be enabled before
Windows™ CE will AutoPlay.
C:\manuals\Palm_PC\Unipro.vp
Wed Aug 26 23:57:33 1998
Color profile: Disabled
Composite Default screen