[ 13 ]
GETTING ST
ARTED
Registering Additional Handsets
When you purchase additional handsets, those handsets need to be
registered before use. Your DCT4960-2 is expandable up to 4 handsets.
Follow the simple steps shown below:
1) Check that the phone is not in use (including the intercom), and make
sure that the handset is not in the base unit.
2) Press and hold the
find handset
key on the base for 5 seconds.
- The charge/voice mail LED will start flashing to tell you that the
system is in the registration mode.
3) Place the NEW (the 3rd) handset in the charging cradle of the base unit.
- The handset beeps to tell you that the registration has finished.
Setting the privacy mode
Your DCT4960-2 has a privacy feature which keeps others from listening in
on your conversation. When you turn this feature On, the conference
function will automatically be canceled.
1) When the phone is in standby mode,
press
menu/enter
.
2) Press
▲
or
▼
and select “
Privacy
”.
3) Press
menu/enter
, and the display will show the
current setting. (The initial setting is “OFF”.)
4) Press
▲
or
▼
to change the selection.
5) Press
menu/enter
to confirm your selection.
6) The display will automatically change to the Menu
Screen after 3 to 5 seconds.
Charge the battery pack
for 12-15 hours before
registering the
additional handset (see
”Install the battery
pack” on page 7).
G E T T I N G S TA R T E D
DCT4960-2 OM_ENG 9/18/01 4:25 PM Page 13
