background image

2

The Uniden

OCEANUS DSC

VHF marine radio has been designed to

give you a rugged, reliable instrument that will provide you with years of
trouble-free service.

With proper care and maintenance, your marine radio could outlast your
present vessel and serve you well on-board.  The full features and
flexibility designed into this quality transceiver will prevent it from
becoming obsolete regardless of changes in craft or geographic
locations.

The technical excellence of this marine radio is demonstrated by the
multiplicity of uses for which it has been found acceptable by the U.S.
Federal Communications Commission.  It is acceptable for compulsory
use on "party boats", for use on vessels subject to the Great Lakes
Radio Agreement or bridge-to-bridge requirements, for general pleasure
and commercial vessels, and certain land stations in marine service.

The 

OCEANUS DSC

is of all solid-state design with conservatively

rated, rugged components and materials compatible with the marine
environment.  The transceiver utilizes a number of gaskets, sealing
rings, waterproof membranes, and other sealants to effect a waterproof
housing for protection of the electronics.  It meets the most stringent
JIS7 waterproof specification.  The unit may be mounted in any number
of convenient locations on your vessel by utilizing the optional universal
mounting bracket (White - FMB322W, Black - FMB322B).

You are encouraged to thoroughly read the rest of this Operating Guide
to acquaint yourself with the characteristics and operation of your
transceiver so that you can contribute to the longevity of your
investment.  

Keep your receipt as proof-of-purchase in case warranty service is
required.

Features, specifications, and availability of optional accessories are all
subject to change without notice.

Note:

OCEANUS DSC

meets JIS7 requirements.

The color of your 

OCEANUS DSC

may vary.

Uniden OCEANUS DSC

UT01910ZZ_0  9/18/03  5:37 PM  Page 2

Summary of Contents for OCEANUS DSC Series





































































Reviews: