Uniden NEO TRUC56, User Manual

Page: 30 / 60

7) “
Speed Dial
” appears. Then press
UP
or
DOWN
to
move the pointer to select the speed dial location
(10 locations: SPD1-SPD0).
8) Press
SELECT/CH
. You will hear a confirmation tone and
“ Done! ” appears on the display.
P H O N E B O O K [ 28 ]
2) Press
SELECT/CH
, then “
Store/Edit Name
” appears.
3) Store the name (up to 16 characters) by using the number keypad.
• See the “Steps for entering names and special characters” (see page 29).
• Use
CID/
s and
PB/ROCKET/
t to move the cursor to the desired location.
• Use
DEL/TRANS
to delete characters as needed.
• Press and hold
DEL/TRANS
to delete all the characters.
If a name is not required, go to step 4.
4) Press
SELECT/CH
to store the name, then
“
Store/Edit No.
” appears.
5) Press the number keypad to enter the phone number
(up to 20 digits), then press
SELECT/CH
to store the number.
6) “
Distinctive Ring
” appears. Then press
UP
or
DOWN
to
move the pointer to one of the Distinctive Ring options, then
press
SELECT/CH
.
If you choose not to store a “ Distinctive Ring ”, simply select
the “ No Selectn ” option.
If you choose not to store the name/number as a Speed Dial, simply
select the “
No Selectn ” option.
If you select a speed
dial location where a
number is already
stored, the new number
will replace the old
number, and the old
number will be stored as
a phonebook location.
TRUC56_OM 12/11/02 9:25 AM Page 28