Uniden MHS135 Owner'S Manual Download

Page: 24 / 68

E-20

Uniden MHS135 Radio Owner’s Manual

the water, unplug it before attempting to remove it

from the water. After you remove the charger from the

water, please contact Customer Service (see the back

cover page for contact information).

Wipe off dirt or shake water from your radio before

placing in the charger if your radio gets dirty or wet.

Important notes on charging the battery

Charge the battery fully before using the radio.

Don’t use the charger when the ambient temperature is

below 0° C (32° F) or above 45° C (113° F).

If the radio is powered down, the battery can charge

in about seven hours. (If the radio is powered on, the

battery takes longer to charge.)

setting up YOur raDiO

Turning It On

Press the

POWER

button for at least two seconds to turn the

radio on. Press and hold it to turn the unit off.

Setting It Up

Even though you can change your radio’s settings at any

time, you will probably want to establish initial settings when

you have turned it on for the first time. You will adjust some

of these settings on an as-needed basis, but some settings

might only be set once and not need adjustment at all.

Changing the Volume

To change the speaker volume, press

VOL-SQ

to enter

Volume Setting mode.The

VOL Level

Adjustment

bar

displays on the LCD. Press

CHANNEL UP

CHANNEL

DOWN

to increase or decrease the volume levels (0 - 15).

Setting the Squelch Level

The squelch feature

reduces static on the speaker

Weak signals

Squelch

Medium

Squelch

High

Squelch

Strong signals

Noise

Summary of Contents for MHS135





































































Search results

Summary of Contents for MHS135

Reviews:

Related manuals for MHS135

Brands by name

Popular brands

Uniden MHS135, Owner'S Manual

Search results

Summary of Contents for MHS135

Reviews:

Related manuals for MHS135

Brands by name

Popular brands