Scan Mode Operation
You can save channels into memory and then use Scan mode to monitor
those channels from lowest to highest. If the radio detects a signal on a
channel, it stays on that channel as long as the signal is received; when the
signal stops, the radio continues scanning.
11
10
08
13
12
14
17
15
The radio scans about
5 channels in 0.5 seconds.
When it detects a signal, the radio stays
on the channel until you press the
Channel Up
button or the signal stops.
Resume
scan
•
To activate Scan mode, press SCAN/MEM.
•
You must have at least two channels in memory to start a scan. However,
you cannot save marine channel 70 or Weather channels.
•
You cannot transmit while in Scan mode.
•
To save a channel into memory, select the channel, then press and hold
SCAN/MEM. The MEM icon displays whenever you tune to that channel.
•
To remove a channel from memory, set the radio to that channel, then
press and hold SCAN/MEM. The MEM icon no longer displays.
•
When the radio stays on a channel, press Channel Up to leave that
channel and resume scanning.
•
To end the scan, press the SCAN/MEM button again; the radio remains on
the last scanned channel.
How it Works?
Using the radio in Scan Mode
14
Handheld VHF Marine Transceiver
UNIDEN MHS127
Summary of Contents for MHS127
Page 37: ...37 Handheld VHF Marine Transceiver UNIDEN MHS127 ...
Page 38: ...38 Handheld VHF Marine Transceiver UNIDEN MHS127 ...
Page 39: ...39 Handheld VHF Marine Transceiver UNIDEN MHS127 ...
Page 40: ... 2014 Uniden Australia Pty Limited Uniden New Zealand Ltd Printed in Vietnam U01UT644CZA 0 ...
