Memory Retention Feature
The Memory Retention Feature retains the LRD 6299SWS/LRD
6399SWS’s operational settings in memory for at least 2 days without
power. When you turn on the LRD 6299SWS/LRD 6399SWS, it will be
in the same mode as when you turned it off.
Full Warning
When the LRD 6299SWS/LRD 6399SWS detects a radar, laser, or safety
warning signal, it emits a distinct warning tone and the corresponding
alert LEDs (X, K, Ka, L, or SWS) will light and blink. The blink rate of
the LEDs increases and the signal strength meter LEDs light successively
as the signal source comes closer.
Audio Alert Only Operation
Press the AUDIO button for Audio Alert Only operation.
When Audio Alert Only is selected, the visual alert and signal strength
meter are disabled. In this mode, all lighted LEDs will dim. Press the
AUDIO button again for the Full Alert (audio and visual) Mode.
(Do not set the Volume control at minimum when in Audio Alert Only
because there will be no alert.)
Note: The audio alert tones for the 3 radar bands and laser are all
different.
MUTE
AUDIO
CITY
13
