Uniden HomePatrol-2, Owner'S Manual, Page: 27 / 46

OTHER FEATURES
Avoid/Unavoid Transmissions
The Avoid feature lets you block systems, departments, and channels from being received. Avoid does
not delete the channel from the database; it simply prevents HomePatrol-2 from stopping on it. You can
Avoid transmissions by tapping Avoid on the submenu pop-up.
Avoids can be either Temporary or Permanent. A temporary avoid clears when you cycle power to the
unit. Permanent avoids must be cleared through the
Avoid OpAons menu from the Advanced Menu . You
can set the default avoid value.
NOTE: You can also tap and hold Avoid in a submenu pop-up to see the Review Avoid List screen.
How to Set the Avoid Default Value
1. Tap the following:
•
Menu
•
Advanced Menu
•
Avoid OpSons
2. The Avoid OpSons screen displays.
3. Tap Default Avoid to toggle the se]ng between Temporary and Permanent.
4. Tap Liste
n to return to normal recepSon or Back to return to Advanced Menu .
How to Avoid a Transmission
1. Tap Avoid on the submenu pop-upon any transmission level (System, Department, or Channel).
An Avoided dialog box displays, indicaSng that that transmission level has been avoided
according to the default value previously set.
2. It also displays the following opSons:
•
OK (Tap OK if this se]ng is acceptable; HomePatrol-2 returns to monitoring transmissions.)
•
Make Permanent/Temporary (Tap this entry to make the Avoid a different se]ng than the
default se]ng. For example, if the default is Temporary avoid, the screen asks if you wish to
make the avoid a Permanent avoid.
•
Cancel (Tap this entry to cancel the Avoid acSon and return to monitoring transmissions.)
3. The Main screen displays ader a selecSon is made.
19