CONTROLS AND THEIR FUNCTIONS
1. O FF/O N V O L U M E : To turn the transceiver on, rotate this control clockwise
past click. To turn the transceiver off, rotate the control counterclockwise past
click. Rotate the control clockwise for a comfortable audio level.
2. S Q U E L C H : The Squelch control is normally set to a position which éliminâtes
undesired background noise with no signal present. With the audio adjusted to a
satisfactory level, rotate the Squelch control clockwise to the point where the
Sound from the speaker is eut off. In this position, there will be no sound from
the speaker until a signal is received. In order to hear weak signais, it may be
necessary to rotate the Squelch control counterclockwise, allowing some back
ground noise to be heard.
3. PA SW IT C H (on S Q U E L C H control): Full counterclockwise rotation of the
squelch control engages the PA function. The P A function should not be used
unless an external speaker is connected. In the squelch (or CB) position, the PA
function is disabled and the radio will transmit and receive on the selected
channel.
4. M O D E S E L E C T O R : This switch selects A M , USB, or L S B mode of operation.
This selector changes the mode of operation of both transmitter and receiver
simultaneously. Set the selector to the mode on which you wish to com-
municate.
- 5 -
