Uniden GPS9000NZ, Owner'S Manual

Page: 11 / 28

9
Direct Connection
Warning: The GPS9000NZ is designed to operate only with
12V DC, negative ground power systems. Operation of the unit
on other voltages or polarities will cause damage to the unit
and may create a fire hazard.
The hard wire lead provided with the unit has bare wires at one
end and a small connector at the other end.
1.Connect the positive red wire to a fused 12V DC source in
your car vehicle's fuse box.
2.Connect the other wire to ground.
3.Run the cord from the fuse box to the GPS9000NZ.
4.Plug the power cord connector into your radar detector at the
jack labelled "DC 12V".
+
-
FUSE BOX
12v DC
Black / Red Black
GPS Qk newfont 2/13/02 4:05 PM Page 11