46
Enter the dId Code
After selecting your G Series system, you must
enter the User ID (DID) code. This DID code can
be found on the back of your handheld moni-
tor behind the kickstand. It is the 20 characters
underneath the barcode. You also can find the
DID code on the Network Information screen.
1. Click the radio button by your system (3)
2. Enter the DID code in all capital letters (4).
3. Click Continue (5)
Once your account setup is complete, select the View Now link.
In order to view live video from your PC, you must download and install the OCX plug in. Click
on the link near the bottom of the page and it will ask you to Run or Save the file. If you choose
to Save, remember where the download location on your computer. After the download is com-
plete, find that file and click on it to install.
After the installation is complete, return to the View Now page on the Portal. On this page, you will
see the DID code from your device that you entered during account setup. There is also a space to
enter a Security Code. It must match your monitor security code that you previously set up.
Enter Security Code
By default, the Security Code is
set to 123456; we recommend
that you change it.
1. Enter your own unique
security code.
2. Click START.
(START button changes to
STOP)
G2420
G2720
DID
DID
DID
AH45-000083-HGNSG
