Uniden G14xx Series, Accessories Manual

Page: 4 / 12

4
Attach the Camera
1. For each camera, attach the camera bracket to the mounting
screw. You can attach the stand to the top or the bottom of
the camera as needed. Tighten it a few turns, then turn the
camera to face the direction you want.
2. Tighten the camera brace up against the camera to secure it
into place.
3. Unlock the mounting post by turning the wingnut a few turns
to the left.
4. Set the mounting post to the correct angle, then tighten the
wingnut until the post is locked into place.
5. Attach the antenna to the rear of the camera.
1
2
4
3
Loosen the
wingnut to
unlock the
mounting
post.
Attach the camera
to the mounting
screw and turn it
to the desired
direction.
Adjust the post to
the correct angle,
then tighten the
wingnut to lock the
post into place.
Tighten the brace against
the camera to
secure it
in place.