6
NOTE
NOTE
OPTIONAL BACKUP BATTERY INSTALLATION
Batteries may be used instead of the supplied AC Adaptor. (The
LCD and keypad backlight is available only when the AC adaptor is
connected.)
1. Remove the battery compartment cover.
2. Fit 3 x AAA alkaline batteries.
3. Replace the cover.
Based on ½ hour use per day, good alkaline batteries should last 2-3
months.
If using the AC Adaptor, Batteries are not required for normal
operation.
Always ensure telephone cord and AC adaptor is
disconnected before opening the battery compartment door
and installing batteries.
Caution, risk of explosion if battery is replaced by an incorrect
type. Dispose of used batteries according to the instructions.
CONNECTING LINE CORDS
Plug one end of the supplied modular cord into the line jack. Then plug
the other end into telephone wall line jack.
CONNECTING THE WALL MOUNT BRACKET
To mount the telephone on a wall, first slot the Wall Mount Bracket
into the bottom two Mounting Bracket Location Slots at the back of the
base. Check the wall mount bracket is the correct orientation.
FP1200_101011.indd 6
11/10/11 4:48 PM
Summary of Contents for FP1200
Page 2: ......
Page 23: ......
Page 24: ... 2011 Uniden Australia Pty Ltd Uniden New Zealand Limited Printed in PRC ...