23
SMS
FUNCTIONS
SENDING NEW SMS MESSAGES
1. In standby mode, press SMS OR select
then scroll
to SMS then
press
Scroll
to User and press
There are 3 features SMS
Received, SMS Write new?, SMS Written?
2. Scroll or to SMS Write new appears. Press
to confirm.
3. Use keypad to key in the message content.
Each SMS message may contain a maximum 160 characters. Press
or
to
move cursor in the text field. The next digit entered will appear to the right of the
cursor. Press Delete to delete the digits at the left of the cursor. Hold down Delete to
delete all digits at the left of the cursor.
4. When finished, press OK and enter the information for No. and Terminal.
5. Press
to confirm all information in the message and select Send and save.
6. Press
again to send the message. The display shows Sending.
7. If sending fails, the display will show Send error then show Send and Save. If you
press
the message will be resent again. If you press Back, the FP106 will
return and by mode. If the message is transmitted, the display shows Send OK and
return to written mode.
1) You must enter the receiver’s telephone number when sending an SMS. Other
information can be omitted.
2) You can select Load from phonebook to recall the phone book records.
3) Press
to switch ABC/abc
4) Press
to choose specific characters.
5) When you are writing an SMS message and the ring is coming, the message will
store on the "Written" box. You can retrieve the unfinished message from the
"Written" box.
menu
ok
ok
ok
ok
ok
ok
am
pm
Summary of Contents for FP106
Page 1: ...Guide FP106 QuickStart LCD Display Caller ID Phonebook Speakerphone SMS Messaging ...
Page 2: ......
Page 39: ......
