Uniden FP104, Operating Manual

Page: 12 / 20

PLACING A TELEPHONE CALL
1. Lift the handset from the Base.
2. Press the keypad buttons to dial the phone number you want.
3. After you have completed the phone call, place the Handset back
on the Base.
RECEIVING A TELEPHONE CALL
When the phone rings, pickup the Handset
from the Base and begin the conversation.
(
Ring indicator
continuously flashes until
the call is picked up.)
ACCESSING THE CALL WAITING SERVICE
(Australian Model only)
1. While talking, you hear the call
waiting signal (series of beep tones).
2. Press
flash
then
2
to switch call and put the current call on hold.
3. To switch back to original call, press
flash
then
1
.
ACCESSING THE CALL WAITING SERVICE
(New Zealand Model only)
1. While talking you hear the Call Waiting beep signal.
2. Press
flash button. This feature sends a 600mS timed “hook-flash”
on telephone line for accessing services such as Call Waiting, etc.
Note: You must subscribe to Telecoms Call Waiting Service before you can
use this feature.
Note: The flash + 2 call waiting procedure toggles call between the
incoming and the original call (vice versa). The
flash + 1 procedure will drop the current call connection and pick
up the incoming call or the call on hold.
9
USING YOUR FP104
memory mute
pause flash redial