![Uniden FP099 Owner'S Manual Download Page 6](http://html1.mh-extra.com/html/uniden/fp099/fp099_owners-manual_4168923006.webp)
Australian Customers:
Setting the LDS code is not
required.
SETUP
4
NOTE
1.While holding down the
del
button, press the
review dn
button once.
2. Use
review up
or
dn
button to select the correct number -
HH : MM MM / DD
3. Press
call back
button to confirm and move to the next digit.
4. Press
del
button to store and exit.
Setting Time and Date
With handset in cradle follow these steps:
NOTE
If you have subscribed to the
Caller ID service, the Time
and Date will automatically
be set when you receive a
call.
NOTE
Match the + / - symbols in
the battery compartment
with each battery.
Battery Installation
Connecting Line Cords
The Caller ID phone requires four 1.5V AAA size batteries for the LCD
display to operate.
1. Remove the screw and open the battery compartment under the base.
2. Insert four 1.5V AAA size batteries.
3. Position the batteries in the compartment and replace the
battery compartment cover.
Plug one end of the supplied modular cord into the telephone line wall jack. Then
plug the other end into the telephone line jack located under the base.
Digit Insert Caller ID (LDS Code)
To correctly display and dial Call ID numbers, you may need to insert a digit at the
beginning of your telephone number. (eg: in New Zealand, Telecom requires a ‘0’ to be
inserted.)
New Zealand:
If you subscribe to Telecom New Zealand, this code has already been set for you to ‘0’.
If you subscribe to another telephone company, please set the LDS code as blank ‘ ’.
If this phone is used with a business PABX - consult the PABX manufacturer for the
correct setting.
Australia:
For private household telephone lines, it is not necessary to set this code.
If this phone is used with a business PABX - consult the PABX manufacturer for the
correct setting.
8:06
2/27
S E T
T I M E
(hours : minutes) (month/day)
1. While holding down the
del
button, press the
review up
button once.
2. Press
review up
or
dn
to select the correct number to be inserted, press
call back
to set the next digit, then press
del
to store and exit.
8:06 2/27
- -
S E T L D S CO D E