A D D I T I O N A L I N F O R M A T I O N
35
ADDITIONAL INFORMA
TION
w w w . u n i d e n . c o m
Replacement batteries
are also available
through the Uniden
Parts Department at
(800) 554-3988,
Monday through Friday
from 8:00 a.m. to 5:00
p.m. or online at
www.uniden.com
Installing a Replacement Battery
Follow the steps below if you need to replace a battery.
1) Press down on the handset battery case cover
(use the finger indention for a better grip) and
slide the cover downward to remove.
2) Remove the existing battery and unplug the
connector from the jack.
3) Plug the battery pack connector (red & black wires)
into the jack inside the battery compartment.
(The connector notches fit into the grooves of the
jack only one way.) Match the wire colors to the
polarity label in the battery compartment, connect the
battery, and listen for a click to insure connection.
4) Make sure you have a good connection by slightly
pulling on the battery wires. If the connection is
secure, the battery jack will remain in place.
5) Place the battery case cover back on the handset by
sliding it upwards until it clicks into place.
Use only the Uniden
rechargeable battery
pack (BT-905)
supplied with your
cordless telephone.
