Uniden EXT3165, Owner'S Manual, Page: 17 / 52

GETTING ST
ARTED
G E T T I N G S T A R T E D [ 17 ] www.uniden.com
1) When the phone is in the standby mode, press and hold
cid/menu . The following screen appears.
2) Press the vol/ring/ key three times to select ¨
Dial
¨.
3) Press select to toggle between ¨
Tone
¨ and ¨
Pulse
¨ for
each setting.
4) Press end or return the handset to the base unit to complete the setting.
The handset returns to the standby mode.
•
If you are not sure of your dialing system, set for tone dialing. Make a trial call.
If the call connects, leave the setting as is, otherwise set for pulse dialing.
•
If your phone system requires pulse dialing and you need to send the DTMF tones for
certain situations during a call, you may "switch-over" to tone dialing. (Refer to
"Tone Dialing Switch-over" on page 20.)
Setting the language
1) When the phone is in the standby mode, press and hold
cid/menu . The following screen appears.
2) Press the vol/ring/ key four times to select ¨
Language
¨.
3) Press select to toggle between ¨
Eng
¨ (English) and ¨
Fr.
¨
(French) for each setting.
4) Press end or return the handset to the base unit to complete the setting.
The handset returns to the standby mode.