Uniden EXT 176 Series, Quick Reference Manual, Page: 18 / 52

G E T T I N G S T A R T E D [ 16 ]
1) When the phone is in the standby mode, press and hold
cid/menu . The following screen appears.
2) Press 4 or press three times to select ¨
Dial
¨.
3) Press select to toggle between ¨
Tone
¨ and ¨
Pulse
¨ for
each setting.
4) Press end or return the handset to the base unit. The handset returns to the
standby mode.
•
If you are not sure of your dialing system, set for tone dialing. Make a trial call.
If the call connects, leave the setting as is, otherwise set for pulse dialing.
•
If your phone system requires pulse dialing and you need to send the DTMF tones for
certain situations during a call, you may "switch-over" to tone dialing. (Refer to
"Tone Dialing Switch-over" on page 19.)
Setting the Language
1) When the phone is in the standby mode, press and hold
cid/menu . The following screen appears.
2) Press 5 or press four times to select ¨ Language ¨.
3) Press select to toggle between ¨
Eng
¨ and ¨
Fr.
¨ for each
setting.
4) Press end or return the handset to the base unit. The handset returns to the
standby mode.
EXT176 7/30/2 11:10 AM Page 16