Uniden EXT 176 SERIES guide, Quick Reference Manual

Page: 13 / 52

GETTING STARTED
G E T T I N G S T A R T E D [ 11 ]
• Use only the supplied AD-310 AC adapter. Do not use any other AC adapter.
• Connect the AC adapter to a continuous power supply.
• Place the base unit close to the AC outlet so that you can unplug the AC adapter easily.
C. Connect the base unit
1) Connect the AC adapter to the DC IN 9V jack
and to a standard 120V AC wall outlet.
2) Set the base on a desk or tabletop, and
place the handset in the base unit.
3) Make sure that the status/Voicemail LED illuminates. If the LED does not
illuminate, check to see that the AC adapter is plugged in and that the handset
makes good contact with the base charging contacts.
Place the handset in
the base with the
keypad facing forward
for charging.
Place the power cord so
that it does not create a
trip hazard or where it
could become chafed
and create a fire or
electrical hazard.
•
After installing the battery pack in the handset, charge your handset at least 15-20
hours before plugging into the phone line . Once the handset battery pack is fully
charged, connect the telephone line cord to the base and telephone wall outlet.
4) Connect the telephone line cord to the TEL LINE jack and
to a telephone outlet once the handset is fully charged.
Modular
If your telephone outlet isn't modular,
contact your telephone company
for assistance.
EXT176 7/30/2 11:10 AM Page 11