Uniden EXT 1480 Owner'S Manual Download

Page: 29 / 62

[ 27 ]

BASICS

Find Handset

Flash and Call Waiting

B A S I C S

Selecting a Different Channel

If you encounter interference while using your phone, you can manually change the phone’s
channel for clear operation. This function works only when the phone is in use.

Press

select/chan

. “

Scanning

” appears on the display, indicating the phone is changing

to another channel. For more information on interference, refer to “Radio Interference” on
page 56.

• You must subscribe

through your local
telephone company
to receive Call
Waiting Service.

• If the handset

battery is
completely drained,
the handset will not
beep when paging.

To locate the handset, press

page

on the base. The handset beeps for

60 seconds, and “

Paging

” appears on the display.

Paging is canceled when pressing any key on the handset or

page

on the

base. Additionally, if you receive an incoming call, page is canceled.

If you have

Call Waiting

service and a call waiting tone sounds while you

are on a call, press

talk/call wait

to accept the waiting call. There is a

short pause, then you will hear the new caller. To return to the original
caller, press

talk/call wait

again.

EXT1460 (ENG)-05/16 5/16/02 1:44 PM Page 27

Summary of Contents for EXT 1480































































Search results

Summary of Contents for EXT 1480

Reviews:

Related manuals for EXT 1480

Brands by name

Popular brands

Uniden EXT 1480, Owner'S Manual

Search results

Summary of Contents for EXT 1480

Reviews:

Related manuals for EXT 1480

Brands by name

Popular brands