Uniden EXP2800, Owner'S Manual, Page: 19 / 28

[ 17 ]
MEMORY DIALING
M E M O R Y D I A L I N G
Erasing a Stored Number from Memory
1) Remove the handset from the base unit.
2) Press m m twice.
3) Press the memor y location (0-9). A tone indicates that the stored number is
erased from memor y.
You cannot erase the
phone numbers by using
m m1 1, m m2 2 , or m m3 3 . These
are the numbers stored
in memory location 1, 2,
and 3.
Chain Dialing
The 10 memor y locations on the handset are not limited to phone numbers. You may
want to store in memor y a group of numbers (up to 16 digits) that you need to enter
once your call connects. This is referred to as Chain Dialing.
An example of this is a bank account number. Once you have called your bank, when
you are prompted to enter the account number, simply press
m m and then the location
where the special number has been stored.
Store your special number in memor y as you would a phone number. (Refer to
"Storing a Phone Number in Memory" on page 15.)
Enter a "pause" in the sequence as necessary. A "pause" counts as one digit and
represents a two second delay in time between digits as they are sent.
EXP2800 1st [1022] 10/22/01 1:09 PM Page 17