Uniden EXP 8000 Series, Owner'S Manual

Page: 9 / 28

5
Connect the base unit
If you want to install the base unit on the wall, see page 7.
Route the cord.
To AC outlet
To telephone outlet
To TEL LINE
To DC IN 9V
AC adapter
(supplied)
Telephone line cord
(supplied)
1
2
Place the power cord so it
does not create a trip
hazard, or where it could
become chafed and create
a fire or electrical hazard.
1
Connect the telephone line cord to the TEL LINE jack and to
a telephone outlet.
2
Connect the AC adapter to the
DC IN 9V
jack and to a
standard 120V AC wall outlet.
3
Set the base unit on a desk or
tabletop and place the handset
on the base unit.
Then raise the antenna to a
vertical position.
Use only the Uniden AC
adapter supplied with this
phone. Do NOT use an
outlet controlled by a wall
switch.
EXP 8000 EN 5th 10/31/00 4:15 PM Page 9