Setup Guide
EXI4560/EXI4561
Step 1 Check the Package Contents
Make sure your cordless phone’s
packaging includes the following
items.
Base
Handset
AC adapter
Rechargeable
battery
Telephone
cord
Also included: • Owner’s manual
Step 2 Install the Handset Battery Pack
Note Use ONLY the Uniden
rechargeable battery pack
supplied with your new
phone!
Remove the
cover.
Connect the
battery pack
with the correct
polarity.
Replace the
cover.
Step 3 Set up the Base
Plug the AC adapter cord to
the
DC IN 9V
jack (yellow).
Route the cord.
Plug the AC adapter to a
20V AC power outlet.
Note Use ONLY the Uniden AC
adapter supplied with your
new phone!
Step 4 Charge the Handset
Place the handset in
the base.
Make sure that
charge LED
illuminates.
Charge for 15-20 hours before
using your phone.
Step 5 Connect to the Phone Line
Plug the other
end into the
telephone wall
jack.
Route the cord.
Plug one end of the
telephone cord into
the base
TEL LINE
jack.
Step 6 Make & Receive Calls
To Make a Call
Press
talk/flash
.
Listen for dial tone.
Dial the desired
number.
To Receive a Call
Pick up the handset and
press
talk/flash
.
To Hang Up a Call
Press
end
or return the
handset to the base.
Additional Features
For more information on these
and other features, please refer to
your Owner’s Manual. For your
convenience, listed below are
important features that will help
you set up your new cordless
phone.
Handset/Base Set up:
- Adjust the Earpiece
Volume
→
P.25
- Set the Ringer Volume
→
P.25
- Set Tone/Pulse Dialing
→
P.7
Caller ID:
Set Caller ID on Call Waiting
(CIDCW)
→
P.5
Note: You must subscribe to
Caller ID services through your
local telephone provider to use
Caller ID and CIDCW.
Refer to your Owner’s Manual for
detailed operations.
For answers to questions and to
order genuine Uniden parts and
accessories 24 hours a day visit
our website at www.uniden.com. If
you have any problems, you can
also call our Customer Hotline at
1-800-297-1023, Mon-Fri 7 a.m.
to 7 p.m., Sat/Sun 9 a.m. to 5 p.m.
CST. (Phone support is closed on
holidays.)
