A D D I T I O N A L I N F O R M AT I O N [ 35 ]
ADDITIONAL
INFORMA
TION
Installing the Beltclip
To a t t a c h t h e b e l t c l i p
Insert the beltclip into the holes on
each side of the handset. Press down
until it clicks.
To re m ove t h e b e l t c l i p
Pull both sides of the beltclip to
release the tabs from the holes.
Your phone may be used with an optional headset, the Uniden
HS910. To use this feature, insert headset plug into the
headset jack. Your phone is ready for hands-free conversations.
(Headset may be purchased by calling the Uniden Parts
Department or visiting the web site. See Page 5.)
Headset Installation
If the beltclip is
attached, you can only
charge the handset in
the face down position.
