Uniden EXI 916 Operating Manual Download

Page: 8 / 46

Introduction

Congratulations on your purchase of the Uniden

EXI 916/917

Cordless

Telephone. It is designed to exacting standards which provide reliability,

long life, and outstanding performance.

Features

Caller ID with Call Waiting ID

Alphanumeric 2-line Backlit LCD

30 Number Caller ID Memory

20 Number Dial Memory

Call Counter

Time and Day Stamp

Automatic Call Return

900 MHz Performance

Automatic Voice Scramble (

EXI917

only)

40 Channel Autoscan System

14 Day Long Life Battery

Page/Find System

AutoTalk™

allows you to answer a call by just removing the Handset from

the Base Unit so you don’t have to waste time pushing buttons or flipping

switches.

AutoStandby

™ allows you hang up by simply returning the

Handset to the Base Unit.

The

UltraClear Plus

innovative technology, together with 40 different

channels, virtually eliminates background noise and provides you with the

best possible reception during all of your conversations.

To protect you against misbilled calls which might result from your phone

being activated by other equipment,

Random Code™

digital security

automatically selects one of over 65 thousand digital security codes for the

Handset and Base Units. Also, the

AutoSecure

™ feature electronically locks

your phone when the Handset is in the Base Unit.

To get the most from your phone, please read this Operating Guide

thoroughly. Also be sure to complete the Product Registration form and

mail it in.

C:\MANUALS5\exi916_7\exi916e.vp

Fri Oct 30 16:26:37 1998

Color profile: Disabled

Composite Default screen

Summary of Contents for EXI 916















































Search results

Summary of Contents for EXI 916

Reviews:

Related manuals for EXI 916

Brands by name

Popular brands

Uniden EXI 916, Operating Manual

Search results

Summary of Contents for EXI 916

Reviews:

Related manuals for EXI 916

Brands by name

Popular brands