manualshive.com logo in svg

Uniden EXI 8965, Owner'S Manual, Page: 40 / 54

Share
Download
Uniden EXI 8965 Owner'S Manual Download Page 40

37

Caller ID 

(continued)

Deleting information from the Caller ID list

The EXI 8965 stores up to 50 messages. If more new calls are received, messages
stored in the list are deleted beginning with the oldest message in the list.
Caller ID data can also be deleted manually.

Deleting a Caller ID message

1

Press              .
Display the message to be deleted
from the Caller ID list by pressing

or        . 

2

Press          .

3

Press        or        to select “

Yes

” or 

"

No

".

4

Press                  or         .

When the pointer is at 

“

Yes

”

:

A beep tone sounds and the next
Caller ID message displayed.

When the pointer is at 

“

No

”

:

The display returns to the Caller ID 
display.

 5/17 12:30PM 03
UNIDEN CORP
817-858-3300

del

Delete Message ?
 Yes
 No

•

ª

del

select/ch

Notes

• While using the “

Delete Message ?

” screen, if no key is pressed for more 

than 20 seconds, an error tone sounds and the telephone returns to standby.

• If you get an incoming call, the deleting operation is cancelled and the telephone

returns to standby so you can answer the call.

•

ª

call id

EXI 8965 5th  99.8.20 2:11 PM  Page 40

Summary of Contents for EXI 8965























































Reviews:

No comments