33
Caller ID
(continued)
Storing Caller ID messages in Memory dialing
Messages shown in the Caller ID list can be stored in memory dialing.
Using the incoming call information (i.e., Caller ID list), the phone number of the party
on the Caller ID list can be stored in memory dialing.
1
Press .
Select the phone number to be stored
from the Caller ID list by pressing
or .
2
Press .
3
Press or or enter a two-digit
number (01- 20) to select the
memory location you want to store.
4
Press .
A confirmation tone will sound. The
number is stored in memory, and the
display returns to the Caller ID list.
5/17 12:30PM 03
UNIDEN CORP
817-858-3300
Select Location
01 UNIDEN CORP
02 JONE DOE
mem
5/17 12:30PM 03
UNIDEN CORP
817-858-3300
select
•
ª
Notes
• If a message has already been stored in the select-
ed memory numbers location, a verification screen
is displayed.
Press to select "
Yes
".
Press to overwrite. The display returns to the Caller ID list.
• Caller ID lists for which phone numbers are not displayed cannot be stored in
memory dialing. You can not store a Caller ID message if no phone number appears
in the message.
• If no key is pressed for more than 20 seconds, an error tone sounds and the telephone
returns to the standby mode.
• If there is an incoming call or paging, memory storage is canceled and the telephone
is set to the incoming call or paging. If you get an incoming call, memory storage is
canceled.
Replace Memory ?
Yes
No
•
select
Caller ID Features
call id
•
ª
EXI 8600 4th 99.9.16 11:11 AM Page 33
