manualshive.com logo in svg

Uniden EXI 5160, Owner'S Manual

Share
Download
Uniden EXI 5160 Owner'S Manual Download Page 41

ADDITIONAL

INFORMA

TION

A D D I T I O N A L I N F O R M A T I O N

[  41 ]

www.uniden.com

Troubleshooting

If your phone is not performing to your expectations, please try these simple steps first.

Symptom

The 

charge/in use

LED

won't illuminate when the
handset is placed in 
the base.

The audio sounds weak
and/or scratchy.

Can't make or receive calls.

Suggestion

•

Make sure the AC adapter is plugged into the base and wall outlet.

•

Make sure the handset is properly seated in the base.

•

Make sure the charging contacts on the handset and base are clean.

•

Move the handset and/or base to a different location away from metal
objects or appliances and try again.

•

Press 

delete/channel

to help eliminate background noise.

•

Make sure that you are not too far from the base.

•

Check both ends of the base telephone line cord.

•

Make sure the AC adapter is plugged into the base and wall outlet.

•

Disconnect the AC adapter for a few minutes, then reconnect it.

•

Change the digital security code (see page 39).

•

Make sure that you are not too far from the base.

EXI5160  7/30/3 5:45 PM  Page 41

Summary of Contents for EXI 5160





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands