background image

G E T T I N G   S T A R T E D

[ 10 ]

Even when the 
battery pack is not
being used, it will grad-
ually discharge over a
long period of time. For
optimum performance,
be sure to return the
handset to the base unit
after a telephone call.

Battery use time (per charge)

From fully charged (15-20 hours charge time)
• Seven hours continuous use
• Fourteen days when the handset is in the standby mode

Low Battery Alert

When the battery pack is very low and needs to be
charged, the phone is programmed to eliminate functions
in order to save power. If the phone is not in use, 
¨

Low Battery

¨ appears on the LCD and none of the keys

will operate. 

If the phone is in use, ¨

Low Battery

¨ flashes and the

handset beeps. Complete your conversation as quickly as
possible and return the handset to the base unit 
for charging.

Cleaning the Battery Charging Contacts

To maintain a good charge, it is important to clean the
battery contacts on the handset and base unit with a
dry cloth or a pencil eraser about once a month.
Do not use any liquids or solvents.

contacts

The last number dialed in the redial memory, the names
and the numbers stored in the memory locations are
retained for up to 30 minutes while you replace the 
battery pack.

EXI376_OM  2/8/2 2:04 PM  Page 10

Summary of Contents for EXI 376 Series





















































Reviews: