T H E I N T E G R A T E D A N S W E R I N G D E V I C E [ 3 4 ]
w w w . u n i d e n . c o m
Setting the Ring Time
The ring time setting allows you to set the number of rings the caller hears before your
answering system plays the outgoing message. You can set the ring time to answer after two,
four, or six rings. Setting [
] (Toll Saver), the answering system picks up after two rings if
you have new messages, and after four rings if there are none. This way, if you make a long
distance call to check your messages, you can hang up after the second ring to avoid billing
charges.
1) With the phone in standby mode, press the
menu/clock
key three times.
You hear "Ring time" and the current ring time ([
] 2, [
] 4, [
] 6, [
] Toll saver),
and it is displayed on the base. Then you hear the guidance for setting the ring time.
2) Press the
or
/volume/select
key until the desired ring time appears.
3) Press the
set
key to select the new ring time. You hear a confirmation tone, then the
announcement "Ring time" followed by the new ring time. After a few seconds, the system
announces "To set record time, press menu again."
TH
E I
N
TE
G
R
A
T
ED
ANS
WER
I
NG D
E
V
I
CE
EXAI7248.book 34 ページ ２００４年１月１５日 木曜日 午前１１時５６分
