S E T T I N G U P Y O U R A N S W E R I N G S Y S T E M
[ 32 ]
www.uniden.com
7) Press the
set
key to select the minute.
8) Press the
volume/select/
or
key until you hear the correct AM or PM set-
ting. The message counter displays [
] or [
].
9) Press the
set
key to select the AM/PM setting.
You hear a confirmation tone followed by the announcement "Time," and the day and
time are then announced for your review. After a few seconds, the system announces
“To set security code, press menu again.”
Setting a Personal Security Code (PIN)
If you want to be able to play your messages from a remote location, you need to
enter a two-digit Personal Identification Number (PIN) code (01-99). To select a
PIN, perform the following steps:
1) With the phone in standby mode, press the
menu/clock
key twice.
The system announces “Security code,” and the current PIN code is announced as
it is displayed on the base. Then the system announces the instructions for
setting the PIN code.
2) Press the
volume/select/
or
key until the desired number appears.
3) Press the
set
key to select the PIN code. You hear a confirmation tone, then the
announcement “Security code” followed by the new PIN code is announced. After a
few seconds, the system announces “To set ring time, press menu again.”
The PIN code is set to
"80" at the factory.
