manualshive.com logo in svg

Uniden EX905, User Manual, Page: 34 / 37

Share
Download
Uniden EX905 User Manual Download Page 34

Precautions

Before you read anything else, please observe the following:

Warning!

Uniden America Corporation

DOES NOT

represent this unit to be

waterproof. To reduce the risk of fire, electrical shock, or damage to
the unit,

DO NOT

expose this unit to rain or moisture.

Rechargeable Nickel-Cadmium Battery Warning

n

This equipment contains a Rechargeable Nickel-Cadmium Battery.

n

Cadmium is a chemical known to the State of California to cause
cancer.

n

The Rechargeable Nickel-Cadmium Battery contained in this
equipment may explode if disposed of in a fire.

n

Do not

short-circuit the battery.

n

Do not

charge the Rechargeable Nickel-Cadmium Battery used in

this equipment in any charger other than the one designed to
charge this battery as specified in this Guide. Using another
charger may damage the battery or cause the battery to explode.

Rechargeable Nickel-Cadmium Batteries

Must Be Recycled or Disposed of Properly

n

Residents of Minnesota should contact 1-800-225-PRBA for
information concerning reclamation and disposal of Rechargeable
Nickel-Cadmium Batteries.

n

Residents outside of Minnesota should contact their local
authorities for information concerning reclamation and disposal
of Rechargeable Nickel-Cadmium Batteries.

Summary of Contents for EX905






































Reviews:

No comments