manualshive.com logo in svg

Uniden DXI665, User Manual, Page: 14 / 52

Share
Download
Uniden DXI665 User Manual Download Page 14

3.

Place the Base Unit on
the posts of the wall plate
and push down until it’s
firmly seated.

4.

Plug the AC Adapter into a standard 120V AC wall outlet.

Note: Do not use an outlet controlled by a wall switch.

5.

Plug one end of the short
telephone cord into the
TEL LINE jack on the Base
Unit.

Note: Charge the
Handset for 15-20 hours
without interruption
before plugging the
phone line into your new
phone. See page 24,
Initial Battery Charging.

Direct Wall Mounting

If you do not have a standard wall plate, you can mount your phone directly on a
wall. Before mounting your phone, consider the following:

•

Select a location away from electrical cables, pipes, or other items behind
the mounting location that could cause a hazard when inserting screws into
the wall.

•

Make sure the wall material is capable of supporting the weight of the Base
Unit and Handset.

•

Use #10 screws with anchoring devices suitable for the wall material where
the Base Unit will be placed.

RING VOL

OFF-LO-HI

PULSE-TONE DC IN 9V

TEL LINE

14

Summary of Contents for DXI665





















































Reviews:

No comments