manualshive.com logo in svg

Uniden DXI 7284-2 Series, Owner'S Manual

The Uniden DXI 7284-2 Series Owner's Manual is available for free download from manualshive.com. This comprehensive manual provides detailed instructions and information on operating and optimizing your Uniden DXI 7284-2 Series product. Get your free manual now and unlock the full potential of your device.

Share
Download
background image

G E T T I N G   S T A R T E D   [ 6 ]

w w w . u n i d e n . c o m

B. Install the Rechargeable Battery Packs into the Handsets

Both handsets are powered by rechargeable battery packs. 
The battery recharges automatically when the handset is 
placed in the main base unit or charging cradle.

1) Press down on the handset battery case cover (use the 

finger indention for a better grip) and slide the cover 
downward to remove.

2) Plug the battery pack connector (red & black wires) into the 

jack inside the battery compartment. 
(The connector notches fit into the grooves of the jack only 
one way.) Match the wire colors to the polarity label in the 
battery compartment, connect the battery and listen for a 
click to insure connection.

3) Make sure you have a good connection by slightly pulling on 

the battery wires. If the connection is secure, the battery 
jack will remain in place.

4) Place the battery case cover back in the handset by sliding 

it upwards until it clicks into place.

•Use only the Uniden 

(BT-905) 
rechargeable battery 
pack supplied with 
your cordless 
telephone.

•Replacement batteries 

are also available 
through the Uniden 
Parts Department at 
(800) 554-3988, 
Monday through Friday 
from 8:00 a.m. to 5:00 
p.m. or online at 

www.uniden.com

!

G

ETT

ING

 ST

AR

TED

U037.book  6 ページ  ２００４年２月２５日　水曜日　午後６時１０分

Summary of Contents for DXI 7284-2 Series

















































Reviews:

No comments

Related manuals for DXI 7284-2 Series

NEC DS1000 Manual preview
DS1000
Brand: NEC Pages: 36
NEC DS1000 Correspondence Course Workbook preview
DS1000
Brand: NEC Pages: 174
NEC DS1000 Quick Reference Manual preview
DS1000
Brand: NEC Pages: 6
NEC DS1000 Quick Setup Manual preview
DS1000
Brand: NEC Pages: 66
NEC DS1000 Operation Manual preview
DS1000
Brand: NEC Pages: 62
Samsung SMT-W5120 Setup preview
SMT-W5120
Brand: Samsung Pages: 2
Samsung SMT-W6100 Getting Started Manual preview
SMT-W6100
Brand: Samsung Pages: 51
Samsung OFFICESERV 500 Series General Description Manual preview
OFFICESERV 500 Series
Brand: Samsung Pages: 124
Samsung iDCS 16 User Manual preview
iDCS 16
Brand: Samsung Pages: 14
Samsung DCS Technical Manual preview
DCS
Brand: Samsung Pages: 287
Aastra Telephone Quick Reference Manual preview
Telephone
Brand: Aastra Pages: 2
Aastra POWERTOUCH 390 Specifications preview
POWERTOUCH 390
Brand: Aastra Pages: 2
Aastra Meridian 9216 Specifications preview
Meridian 9216
Brand: Aastra Pages: 2
Aastra Meridian 9116 Specifications preview
Meridian 9116
Brand: Aastra Pages: 2
Aastra Dialog 4106 Basic Quick Reference Manual preview
Dialog 4106 Basic
Brand: Aastra Pages: 2
EastLink Telephone Customer Manual preview
Telephone
Brand: EastLink Pages: 28
Aastra 9617 Online User'S Manual preview
9617
Brand: Aastra Pages: 461
Aastra 9120 User Manual preview
9120
Brand: Aastra Pages: 40

Brands by name

Popular brands

Load more brands