Uniden DXAI4588 Series Page 14 Owner'S Manual Download

Page: 14 / 68

Register.Handsets.to.the.Main.Base.before.Using!

Both handsets will need to be registered to the main base unit before use. Whichever handset you choose to charge

in the base unit will automatically register to the base unit. The handset charging in the extra charging cradle MUST

also be registered to the base unit before use.

To register the extra handset:

) Be sure both handsets are fully charged.

2) Pick up the handset from the charging cradle, and place it in the base unit. The

charge/in.use

LED light on the

base unit will begin to flash, indicating that the registration is taking place.

3) Wait for at least 5 seconds, then pick up the handset from the base unit.

4) Press

[talk/flash]

on one handset. If TALK appears on the display, the handset is registered, press

[end]

Then try with another handset. If each handset displays TALK, the handset has been registered to the base.

Otherwise, return to step and try again.

5) Once both handsets are registered, it doesn’t matter which handset is placed in the base unit or the charging

cradle.

Note:.

•..When.you.charge.the.handsets,.Caller.ID.summary.screen.and.the.name.of.

the.handset.appears..Following.display.is.the.example.of.handset.No.1.(HS1).

•. The.charging.cradle.can.be.used.to.charge.any.handset.

HS1

Total:00

HS1

Total:00

Summary of Contents for DXAI4588 Series





































































Search results

Summary of Contents for DXAI4588 Series

Reviews:

Related manuals for DXAI4588 Series

Brands by name

Popular brands

Uniden DXAI4588 Series, Owner'S Manual

Search results

Summary of Contents for DXAI4588 Series

Reviews:

Related manuals for DXAI4588 Series

Brands by name

Popular brands