A D D I T I O N A L I N F O R M A T I O N
[ 58 ]
Symptom
Severe noise interference.
Handset No.1 or No.2 not
working.
”
Unavailable
” message is
displayed on the LCD
screen of the handset.
The handset doesn’t
communicate with the main
base or the other handset.
No 3-way conversation.
”
Low Battery
” message is
displayed on the LCD screen.
The answering system does
not work.
Suggestion
• Keep the handset away from microwave ovens, computers, remote control
toys, wireless microphones, alarm systems, intercoms, room monitors,
fluorescent lights, and electrical appliances.
• Move to another location or turn off the source of interference.
• Make sure the battery pack is connected to the handset and fully
charged.
• Place one handset at a time on the main base for 5 seconds each.
• Make sure the other handset is not already in use. Both handsets cannot
be in talk mode at the same time.
• Place the handset for at least 5 seconds to re-register to the main base.
• Make sure the handset is not too far from the main base when trying to
use.
• Re-register both handsets (See page 12).
• Make sure that you registered the extra handset.
• Only one handset at a time can talk with an outside caller. To allow the
other handset to talk to the caller, transfer the call.
• Place the handset back in either cradle to recharge over night.
• Make sure the main base unit is plugged in.
• Make sure the answering system is turned on.
DXAI388-2 7/16/2 11:55 AM Page 58
