Low Battery Indicator
When the Battery Pack in the Handset is
very low and needs to be charged, the
batt low
LED on the Handset flashes.
If the
batt low
LED begins to flash, the phone is programmed to eliminate its
functions to save power. The table below describes what to do to return
your phone to normal operation.
During a Call
In Standby Mode
Only the
talk
button operates.
None of the buttons will operate.
The Handset beeps and the
batt low
LED flashes once every 3 seconds.
The Handset
batt low
LED flashes
once every 3 seconds.
Complete your call as quickly as
possible.
You will not be able to make a call.
Return the Handset to the Base Unit
for charging.
Return the Handset to the Base Unit
for charging.
❉
Allow 15 to 20 hours without any interruption for the Handset to fully
recharge.
Cleaning the Battery Contacts
To maintain a good charge, it is
important to clean all charging
contacts on the Handset and Base
Unit about once a month. Use a pencil
eraser or other contact cleaner.
Do not
use any liquids or solvents.
talk
batt
flash/rdl
1
abc
def
2
3
low line 1
line 2
hold
conf
Extend A Phone
• •
25
CHANNEL
PLUS
ULTRACLEAR
speaker
tone
1
abc
ghi
def
mno
pqrs
tuv
wxyz
oper
jkl
2
5
8
0
#
4
7
3
6
9
line 1
line 2
hold
hold
conf
page/int’com
status
pause
memo
flash/rdl
voice
scramble
talk
batt
tone
mem volume int’com chan
ringer
flash/rdl
1
abc
ghi
def
mno
pqrs
tuv
wxyz
oper
jkl
2
5
8
0
#
4
7
3
6
9
low line 1
line 2
hold
conf
pause
CONTACTS
20
