Y
OUR
NEW
PHONE
If your phone is not performing to your expectations, please try these simple steps
first before calling Uniden customer service -
TROUBLE SHOOTING
No dial tone
Check that the phone line cord connectors at both ends
are pushed in until they click into place.
Re-register the handset to the base (see page 8).
PROBLEM
You may have exceeded the limit of the number of phones
that can be connected to the same line, at the one time.
Disconnect one or more telephone devices.
No power on the
handset
Does not charge
Check the battery pack plug, inside the battery
compartment of the handset, is fully pushed in.
The handset battery pack may need to be charged.
Check the AC Adaptor is plugged in at both ends and
switched On.
SUGGESTION
Does not ring
Range is limited
Make sure the base antenna is vertical.
Move the base unit so that it is centrally located in your
residence or office and make sure that the base unit is
not located near electrical appliances.
Calls received,
flutter or fade
The handset rechargable battery pack may need charging.
You may be out of normal operating range. Move closer
to the base unit.
TR
OUBLESHOOTING
Make sure the charging contacts on both the handset and
the base unit are in contact during charging.
The charging contacts may need to be cleaned with a dry
cloth or pencil eraser.
Check the AC Adaptor is plugged in at both ends and
switched On.
Keypad does not
work
Keypad lock is on. Press and hold to unlock.
flash
10
