Uniden DS 825, Quick Start Manual

Page: 11 / 28

7
To attach the beltclip
To remove the beltclip
INSTALLING THE BELTCLIP
l
Gently pull one side of the beltclip
to release.
l
Press the beltclip against the rear of the
handset until it clicks into place.
If you are using an
optional headset, you
must still use the handset
keypad for phone
operations.
!
options
redial/p
select/
channel
delete
1 2
3
4
5
7
6
8 9
*
0
#
tone
pqrs
g h i
abc
def
mno j k l
wxy t u v
oper
talk cid
memory flash
vol
headset
jack
Your phone may be used with an optional
headset.
To use this feature, simply plug the headset
into the headset jack.
HEADSET INSTALLATION
During a call, noise will increase if you move your handset too far from your base unit.
If the range limit of your base unit is exceeded, your call will terminate within 30 seconds.
KEY LOCK / UNLOCK
When the handset is in the
ST/BY
mode, press
and hold , a beep confirms and
the screen displays
KEY LOCKED.
During the ‘Key Locked’ condition, the keys
will only operate on an incoming call. To
unlock the keys, press and hold
again.
KEY LOCKED
KEY UNLOCKED
TRAVELLING OUT OF RANGE
flash/reg flash/reg
flash/reg
flash/reg