5
2. On the handset, press and hold
Pound (#)
until the display
says
Handset Registering
(about 2 seconds).
After about 30 seconds, the handset display
should say
Registration Complete
.
Test the connection
Pick up the handset and press
Talk
. Make sure you get a
dial tone. (Press
End
to hang up.)
If...
Try...
-
you don't hear a dial tone
-
the display says
Registration Failed
Making sure the handset is
fully charged, then trying
again.
Attaching the Belt Clip
Line up the holes on each side of the handset. Insert the belt
clip into the holes on each side of the handset. Press down
until it clicks.
To remove the belt clip, pull either side of the belt clip to
release the tabs from the holes.
Using the Handset
When the handset registers to a base, it adapts its
software to match that specific base. This means that
the exact features and operation of the handset will vary
slightly depending on which base you register the handset
to. Refer to the user guide for the base you're registering
the handset to for feature descriptions.
All features and operation for the handset are described
in the user's guide for one of the bases listed under the
Compatible Bases
section.
User guides for all Uniden phones are available on our
website for free downloading.
