5
If..
Try..
x
there is no dial tone
x
the error tone sounds
x
charging the headset until fully
charged and then retry connection
Test the Connection
A. On the phone base, press and hold
FIND HANDSET
for 5 seconds.
#
On some models (such as the XdECT 6145BT) press
MENU
, select
Register Accy.
from the display menu selection, and then press
SElEcT.
B. On the headset, press and hold
VOlUME
+
/
-
for 5 seconds.
The status LED will blink rapidly, allowing for the registration mode.
When registered, a confirmation tone sounds at the phone base and the
headset LED flashes blue once every 10 seconds.
Register the headset
Pick up the headset and press
ON/OFF/TAlK
. Listen for a dial tone.
(Press
ON/OFF/TAlK
to hang up.)
REGISTERING TO A BASE
To Power On
To Power Off
x
press and hold
ON/OFF/TAlK
for 3
seconds
.
x
press and hold
ON/OFF/TAlK
for 3
seconds
To answer a call
To adjust call or ringer volume
x
press
ON/OFF/TAlK
and speak
clearly
x
press
ON/OFF/TAlK
again to end
call
call (in use) or ringer (standby):
x
press
+
to increase or
–
to decrease
To mute the microphone
To answer call waiting call
x
press
MUTE/FlASH
to mute
x
press
MUTE/FlASH
again to
unmute
x
press and hold
MUTE/FlASH
x
press and hold
MUTE/FlASH
to
return
The accessory headset won’t work until you register it to a compatible
Uniden cordless phone!
OPERATION
