Uniden DECT 3236, Owner'S Manual

Page: 25 / 40

25
Personalizing the Greeting
Your personal outgoing message or greeting can be from 2 to 30 seconds
long. If you don’t record a greeting, the system uses a pre-recorded
greeting:
Hello, no one is available to take your call. Please leave a
message after the tone.
To... Follow these steps:
Record a personal
greeting 1. Open the menu with the phone in standby. Select
Answering Setup , then Record Greeting .
2. Press
MENU/SELECT
to start recording. Wait until the
system says,“Record greeting” before speaking.
3. Press
MENU/SELECT
to stop recording. The system
plays back your new greeting.
4. To keep the greeting, press
END/CLEAR
. To re-
record it, press
MENU/SELECT
.
Switch between
greetings
Delete your
greeting
Switch to your personal greeting, press
END/CLEAR
“Delete Greeting?” is displayed. Select “Yes” to
clear greeting.
Accessing the Answering System
When the phone’s in standby, you can access the system from any
handset:
•
Only 1 handset can access the system at a time.
•
If you do nothing for 30 seconds, the phone returns to standby.
•
During remote access, the phone beeps so you know it’s waiting for the
next command.
•
You can press the number key shown next to each command instead of
scrolling through the screens.
1. Open the menu with the phone in standby.
Select Answering Setup , then Greeting Options .
2. The system plays back the current greeting.
Press
MENU/SELECT
to switch greetings.