Uniden Dect 1635 Series Owner'S Manual Download

Page: 7 / 36

Key (Icon)

What it does

• In standby: increase the ringer volume.

• During a call: increase the earpiece/speaker

volume.

• In any menu or list: move the cursor up one line.

DOWN

• In standby: decrease the ringer volume.

• During a call: decrease the earpiece/speaker

volume.

• In any menu or list: move the cursor down one

line.

MENU/SELECT

• In standby: open the menu.

• In any menu or list: select the highlighted item.

CID/RIGHT

• In standby or during a call: open the Caller ID list.

END

• During a call: hang up.

• In any menu or list: exit and go to standby.

MESSAGE/

MUTE

• In standby: access your answering system.

• During a call: mute the microphone.

• While the phone is ringing: ignore this call (mute

the ringer).

INTCOM/

CLEAR

• In Standby: start an intercom call.

• During menu operations: delete saved data.

• During a call: put the call on hold and start a call

transfer.

REDIAL/

PAUSE

• In standby: open the redial list.

• While entering a phone number: insert a

2-second pause.

SPEAKER

• Switch a normal call to the speakerphone (and

back).

TALK/FLASH

• In standby: start a telephone call (get a dial tone).

• During a call: switch to a waiting call.

PHONEBOOK/

LEFT

• In standby or during a call: open the phonebook.

• In the menu: go back to the previous screen.
Press and hold to lock/unlock the keypad

Summary of Contents for Dect 1635 Series





































Search results

Summary of Contents for Dect 1635 Series

Reviews:

Related manuals for Dect 1635 Series

Brands by name

Popular brands

Uniden Dect 1635 Series, Owner'S Manual

Search results

Summary of Contents for Dect 1635 Series

Reviews:

Related manuals for Dect 1635 Series

Brands by name

Popular brands