Uniden Dash View SX, User Manual, Page: 11 / 28

11
UNIDEN DASH VIEW SX/SXR Vehicle Recorder
Recording
When connected to a car charger with power, the unit automatically goes into
the record mode and starts recording.
A flashing RED led on the device indicates that the device is recording.
NOTE
To record a video, ensure that a valid micro SD card is inserted
in the given slot. Also note, that inserting/removing the SD card
while the device is recording causes the device to shutdown
and in worst case missing recording files.
Protect the Current Recording
While recording, if you want to protect the current recordings, then press the
Smart One Touch
button ONCE. Those recordings have been locked and will
not be overwritten by normal video recordings.
This also applies when the G-Sensor registers an impact while recording.
GPS Reception information
Surroundings with tall buildings, tunnels or poor weather conditions may
result in poor GPS reception or even lose GPS signal. Over-tinting or a rain
sensor on the windshield can affect GPS reception.
If the signal is unstable even when you are driving, please try changing the
installation spot of your dash camera. For the first time use, it takes about
15~20 minutes to get GPS signal, and after that, it normally takes about 3
minutes.
NOTE
Sticker mount is difficult to remove after it is installed and will
not stick well on a curved/textured or wet surface.