background image

27 - English

3.  Let dry for at least 3 days. Check for liquid inside the phone before replacing 

compartment covers and reconnecting cords.

Resetting Stations

If you have problems with the base, unplug the base to reset it. Plug it back in 

after at least a minute.
If you have trouble with a cordless handset or if you want to replace one, reset 

it:
1.  Press and hold 

FlasH/exiT

 and 

POUND (#) 

 at the same time until 

System Reset

 

displays (about 5 seconds).

2.  If you still have the base the handset is registered to, select 

Deregister HS

, then 

select the handset you want to reset. If you don't have that base anymore, 

select 

Base Unavailable

.

3.  To confirm, select 

Yes

. The handset displays 

Handset not registered

.

Registering a Handset

If you see a “not registered” message on a handset, you must register it to a 

base before using it.
1.  On the base, open the menu and select 

Register Handset

.

2.  On the handset, press and hold 

POUND (#) 

until the handset display says 

Handset Registering 

(about 2 seconds). 

3.  Wait until the handset display says 

Registration Complete

 (about 30 seconds), 

then pick up the handset and press 

eND/CleaR

.

 

#

If you don’t hear a dial tone or the display says 

Registration Failed

, charge 

the battery completely, then try again.

Adapter and  
Battery Information

AC adapter

Base

Charger

Part number

PS-0034

PS-0035

Input voltage

120V AC, 60 Hz

Output voltage 7.8V AC 

@ 450mA

8V AC  

@ 300mA

 



Use only the supplied AC adapters.

 



Use the proper adapter for the base 

and any chargers.

 



Do not place the unit in direct 

sunlight or subject it to high 

temperatures. 

 

Battery pack (with normal use)

Part number

BT-1025

Capacity

500mAh, 2.4V DC

Talk time

about 10 hours

Standby time

about 7 days

Battery life

about 1 year

 



Replace the battery when the talk 

or standby time becomes noticeably 

reduced. For replacements, call the 

Parts Department (see the front 

cover).

 



If you hear a strange beep during a 

call, check the display. When the 

battery gets low, the handset shows 

a low battery alert; recharge the 

battery.

Summary of Contents for D3098S































Reviews: