Uniden D2380 Series User Manual Download

Page: 21 / 24

English - 21

Installing a Line Filter or DSL

Filter

A telephone line filter or DSL filter

prevents services that use the phone

line from causing interference on your

phone. To get a line filter, contact

your service provider or look in an

electronics store.
Plug the filter into the telephone wall

jack and plug the base into the filter.

Make a test call to make sure the noise

is gone.

Liquid Damage

CAUTION: If the base is covered in

liquid, disconnect the adapter &

phone cord from the wall before

touching it.

If the liquid is only on the exterior

housing of the base or handset, wipe it

off and use as normal. If you can hear

liquid inside the housing:
1. Remove all compartment covers, and

disconnect all cables and cords.

2. If liquid is leaking from any vent

or hole, turn the phone so that vent

faces down. If not, place the largest

vent face down.

3. Let dry for at least 3 days. Check

for liquid inside the phone before

replacing compartment covers &

reconnecting cords.

Resetting Handsets

If you have trouble with a handset or

if you want to replace one, clear the

registration information from the base

and the handset:
1. Press & hold

End

and

at the same

time until you see the

System Reset

menu.

2. If you still have the base the handset

is registered to, select

Deregister HS

then select the handset you want

to reset. If you don’t have that base

anymore, select

Base Unavailable

3. To confirm, select

Yes

. The handset

displays

Handset not registered

Registering Handsets

If you see a “not registered” message on

a handset, you must register it to a base

before using it.
1. Place the handset in the base;

the display should say

Handset

Registering

2. Wait until the display says

Registration Complete

(about 30

seconds), then pick up the handset;

press

TALK/FLASH

3. If you don’t hear a dial tone or the

display says

Registration Failed

charge the battery completely, then

try again.

Adapter and Battery Information

AC adapter Base

Charger

Part number

PS-0035

Input voltage

120V AC, 60 Hz

Output voltage 8V AC @

300mA

8V AC @

300mA

Use only the supplied AC adapters.

Use the proper adapter for the base & any

chargers.

Do not place the unit in direct sunlight or subject

it to high temperatures.

Summary of Contents for D2380 Series

























Search results

Summary of Contents for D2380 Series

Reviews:

Related manuals for D2380 Series

Brands by name

Popular brands

Uniden D2380 Series, User Manual

Search results

Summary of Contents for D2380 Series

Reviews:

Related manuals for D2380 Series

Brands by name

Popular brands