English - 17
Programming a Security Code
With the phone in standby, open the menu; select
Ans. Setup
, then select
Security Code
. Use the number keypad to enter a two-digit security code
(
01
to
99
). Press
MEnu/sElEcT
when you’re finished.
#
Remember to make a note of your new security code!
Dialing In to Your System
1. Call your phone number & wait until the system answers. (If the system
is turned off, it answers after 10 rings & sounds a series of beeps.)
2. During the greeting or beeps, press
0
and
immediately
enter your
security code. If you enter it incorrectly 3 times, the system hangs up
and returns to standby.
3. The system announces the time, the number
of messages in memory, and a help prompt. It beeps to let you know it's
waiting for a command.
4. When you hear beeping, enter a 2-digit command from the chart.
#
If you don't press any keys for 15 seconds, the system hangs up
and return to standby.
IMPORTANT INFORMATION
Solving Problems
If you have any trouble with your phone, check this section first. If you
need help, call our Customer Care Line listed on the front cover.
General problems
Possible solutions
No handsets can
make or receive calls.
x
Check the telephone cord connection.
x
Disconnect the base AC adapter for a few
minutes; then reconnect it.
01 Repeat message
05
Stop playback
02 Play message
06
Turn the system on
03 Skip message
09
Turn the system off
04 Delete message
10
Hear help prompts
