8 - English
x
Each handset remembers the last 5 numbers you dialed on it.
x
Only one handset can access one of the lists at a time.
To...
Press...
open the list
phoNEbook/LEfT, caLLER Id/RIGhT
, or
REdIaL/pausE
.
scroll through the list
up
or
dowN
.
dial the current entry
TaLk/fLash
or
spEakER
.
add
1
at the front of CID number
*
before dialing for a toll call.
store the current CID or redial entry
to the phonebook
MENu/sELEcT
, then select
Store Into Pb
.
Proceed to edit the name and number.
edit the current phonebook entry
MENu/sELEcT
, then select
Edit
.
delete the current entry
MENu/sELEcT
, then select
Delete
(or
Delete Entry
). To confirm, select
Yes
.
close the list
phoNEbook/LEfT
.
#
When it’s in standby, the handset shows how many calls came in
since the last time you checked the CID list.
Adding Phonebook Entries
With the phone in standby, open the phonebook. Press
MENu/sELEcT
and then
select
Create New
. Proceed to enter a name and number.
x
Enter the phone number (up to 20 digits) exactly as you would dial it.
x
If you need to enter a pause between the numbers, press
REdIaL/pausE
; you’ll
see a
P
in the display. (The dialing will pause for about 2 seconds per a digit.)
x
To edit the number, press
INTERcoM/cLEaR
to back up the cursor and delete
numbers. Re-enter the correct numbers.
Deleting All the Entries
With the phone in standby, open the list (phonebook, CID, or redial). Press
MENu/
sELEcT
and then select
Delete All
. To confirm, select
Yes
.
Chain Dialing
If you often have to enter a series of digits or a code number during a call, you
can save that code number as a regular phonebook entry and use the phonebook
to send the code number.
Make a call normally. When you hear the prompt that asks you to enter your
number, open the phonebook and find the entry. Press
MENu/sELEcT
to send the
code. If you change your mind, just close the phonebook.
